- HPR
- Long-lasting Plarad quality
- For particularly large bolting joints
- High torque range of up
- to 150,000 Nm
- System pressure of up to 350 bar
- Quick insert change
- Deep penetration of the ring spanner inserts (narrow radii)
- Large widths across flats
The HPR can be used wherever other torque tools prove to be unsuitable due to limited clearance above the bolt to be tightened or if the distance to the boundary on the side is too small. The HPR does not require any more space than an ordinary ring spanner.
The ratchet cartridge allows you to work without interruption. Rearrangements during the bolting process are not required.
Ring spanner inserts with particularly large widths across flats, e.g. 320 mm, are available. They can be adjusted individually.
Hydraulic power pack CTK 3.5 EFS specially designed for the HPR.